Job Search Results

13 listings were found that matched your search words: Keywords: ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. )
( Listing generated 2009/11/20 Friday 08:20PM Pacific Time by ContractJobHunter. )

NOTE: If you were a subscriber, two things could have made this job search easier
1) A simple click of your mouse would have instructed us to instantly email your online resume to any (or all) of these firms.
2) We could have emailed you these Search Results, and you would not have needed to even log onto the Internet to use our service.

Click Here To Subscribe!

Listings 1 - 13
  Software Engineer
Description:
Required: Must have a current SECRET CLEARANCE. Coding in C++, C, understand OOD, UML modeling, interpret Interface Design Descriptions. Experience with embedded programming, multi threading and standard template library(STL)

Desirable: 1553 Bus, Java, Ada, Assembly, Enterprise Architect, rational rose, MS Visual Studio, Win32 API, working on CMMI, DOD environment or DO-178B for Tactical radio development, terminal development, Satcom or encryption/decryption
 
Job Number: SOFEN-OH
Job Location: Dayton, OH
Rate: $65-70
Per Diem: YES
Overtime: YES
Duration: 6 months plus
Start Date: ASAP
Input Date: 10/06/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Systems Engineer
Description:
Must have current active secret clearance. Systems Engineer experienced in tactical radios or satellite communications. Must have BS degree, 5 years experience in SATCOM/Radio systems development and traceability. ICD and IDD development, integration procedure development and execution and test procedures. Understand NSA certification process. Requirements definition and systems design, CMMI process level 3, systems development lifecycle.
 
Job Number: SYSEN-OH
Job Location: Dayton, OH
Rate: 65.00-70.00
Per Diem: YES
Overtime: YES
Duration: 6 months plus
Start Date: ASAP
Input Date: 10/06/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  RF Engineer 2 OPENINGS
Description:
Contribute to our mission critical systems for front line platforms by generating electrical designs, initial layouts and providing support for the detailed design of integrated electronic components and subsystems for airborne applications. To qualify, you must have a BSEE, 10+ years of related experience in synthesizer and converter design, the ability to lead a team in the development of a complex electronics assembly, and a broad knowledge of RF design software such as Agilent’s ADS and Ansoft’s HFSS. Familiarity with RF MMIC microelectronics design techniques is a definite plus.
 
Job Number: RFENG-LI
Job Location: Long Island, NY
Rate: 65.00-75.00
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months
Start Date: ASAP
Input Date: 11/05/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Systems Engineer 4 Openings
Description:
10 years experience- CMMI, should have electronic warfare experience and black box background.
 
Job Number: SYSEN-LI
Job Location: Long Island, NY
Rate: $68.00-73.00
Per Diem: YES
Overtime: YES
Duration: 6-12 months
Start Date: ASAP
Input Date: 11/05/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Technology Architect 6 Openings
Description:
1)
Job Description: Technology Architect to work in a team to develop a prototype model server communication protocol based on version 4 of the EPICS Channel Access Protocol which implements PVData structures natively in the Channel Access Protocol. This position also includes review of the data stuctures that are used to imlement the model based control in a client/server architecture.The initial goal is for the team to produce a Python and Jave Client to support high level applications. It must also support a C/C++ based server to provide a binding to the Tracy 3 and Elegant models.

Qualifications Required: Requires a B.S. in Computer Science, Electrical Engineering, or Physics. The job requires an expert in the client/server protocols implemented over TCP/IP and UDP. A complete understanding of robust communication implementations is required. Intimate familiarity with TCP/IP and UDP protocols is required. The successful candidate must have the ability to clearly communicate and work productively in a team setting.

Qualifications Preferred: Knowledge of EPICS and accelerator control. Knowledge of RTEMS, vxWorks, Linux, and model based control.


Length of Assignment: 1 year

2)

Job Description: Technology Architect to improve and complete the preliminary design document.Work with the NSLS II power supply control staff to complete the requirements description, the external interface description, device desription, and control system block diagram for the storage ring power supplies.

Qualifications Required: Requires a B.S. in Computer Science, Electrical Engineering, or Physics. The job requires an expert in process control that includes issues facing the integration of power supplies: such as: power supply regulation, digitizers, synchronous DAC control. Control system architecture experience is required. Project engineering experience is required. Experience producing engineering design, prototypes, and project execution in industrial control is required. The successful candidate must have the ability to clearly communicate and work productively in a team setting.

Qualifications Preferred: Knowledge of EPICS and accelerator control. Knowledge of RTEMS, vxWorks, FPGA integration, integrating hardware into EPICS, is desired..

Length of Assignment: 3 months


3)

Job Description: Technology Architect to implement the EPICS driver to communicate to the ACS control system. Determine the interface that is to be used for the ACS, write the driver to integrate ACS into EPICS, bench mark the communication, and implement diagnostics to demostrate the quality of the communication.

Qualifications Required: Requires a B.S. in Computer Science, Electrical Engineering, or Physics. The job requires an expert in driver implementation in a real time operating system environment. Control system architecture experience is required. Project engineering experience is required. The successful candidate must have the ability to clearly communicate and work productively in a team setting.

Qualifications Preferred: Knowledge of EPICS. Knowledge of RTEMS, vxWorks, and the ACS system is desired.

Length of Assignment: 6 months

4)

Job Description: Technology Architect to improve and complete the preliminary design document. Work with the NSLS II vacuum control staff to complete the requirements description, the external interface description, device desription, and control system block diagram for the storage ring diagnostics. After the completion of the preliminary design document, support the development of the storage ring vacuum prototype to determine the final architecture and support the completion of the final design document.

Qualifications Required: Requires a B.S. in Computer Science, Electrical Engineering, or Physics. The job requires an expert in vacuum controls and the use of vacuum in a large facility. Control system architecture experience is required. Project engineering experience is required. Experience producing engineering design, prototypes, and project execution in particle accelerators is required. The successful candidate must have the ability to clearly communicate and work productively in a team setting.

Qualifications Preferred: EPICS experience. Accelerator control experience. Knowledge of RTEMS, vxWorks, Allen-Bradley PLC programming, and drivers for Allen-Bradley PLCs.

Length of Assignment: 1 year

5)

Job Description: Sr. Technology Architect to improve and complete the preliminary design document. Work with the NSLS II diagnostics control staff to complete the requirements description, the external interface description, device desription, and control system block diagram for the storage ring diagnostics. After the completion of the preliminary design document, support the development of the storage ring diagnostics prototype to determine the final architecture and support the completion of the final design document.

Qualifications Required: Requires a B.S. in Computer Science, Electrical Engineering, or Physics. The job requires an expert in the deployment of high speed, low latency, high accuracy analog to digital converters, and their use in diagnostics controls. Control system architecture experience is required. Project engineering experience is required. Experience producing engineering design, prototypes, and project execution in a large process control system is required. The successful candidate must have the ability to clearly communicate and work productively in a team setting.

Qualifications Preferred: Knowledge of EPICS and accelerator control. Knowledge of RTEMS, vxWorks, camera control, oscilloscopes, high speed digitizers, beam position monitors, beam loss monitors and all high speed diagnostics are preferred.

Length of Assignment: 1 year

6)

Job Description: Technology Architect to improve and complete the preliminary design document.Work with the NSLS II timing control staff to complete the requirements description, the external interface description, device desription, and control system block diagram for the storage ring power supplies.

Qualifications Required: Requires a B.S. in Computer Science, Electrical Engineering, or Physics. The job requires an expert in timing system application, and the use of timing system control for distributed, synchronous control. Control system architecture experience is required. Project engineering experience is required. Experience producing engineering design and project execution in particle accelerators is required. The successful candidate must have the ability to clearly communicate and work productively in a team setting.

Qualifications Preferred: Knowledge of the Micro Research Timing system, accelerator control, and EPICS.

Length of Assignment: 3 months



Requirements
Technology Architect

There are 6 slightly different openings shown above - all must have over 5 yrs experience
 
Job Number: TECARC-LI
Job Location: Long Island, NY
Rate: $55-65/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months
Start Date: ASAP
Input Date: 11/09/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Quality Assurance Engineering 3
Description:
Overview: Quality Assurance Engineer supporting Charleston facility AS9100 compliant Quality System, as well as, ensuring successful completion of 787 Program objectives. Develops, modifies, applies and maintains quality standards and protocol for processing materials into partially finished or finished product. Develops and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
Responsibilities: Primary responsibilities will be AS9102 compliant FAI Plan development utilizing Catia V5model based definitions. Other duties will include providing oversight and guidance to junior members of Quality Engineering organization and inspection; End item product reconciliation; 3D model Interrogation for Product and Tooling using CATIA V5 and Enovia; Material Review Board activities; Corrective action development and oversight; Quality planning activities; Process improvement activities; Implementing methods and procedures for evaluating the precision and accuracy of products; Performing statistical analysis that maximizes product quality and cost objectives.
Qualifications: The successful candidate will typically have BA/BS or equivalent and 6 years related experience including prior composite fabrication, MRB, and C/A experience.
Strong computer skills and prior experience in the following areas is also beneficial: CATIA V5 and Enovia, Geometric Dimensioning and Tolerancing, FAA conformity inspections, statistical analysis, and experience in new program development and planning.
 
Job Number: 7873
Job Location: North Charleston, SC
Rate: $45-$55/hr
Per Diem: N/A
Overtime: Possible
Duration: Avg is 6-12 mos
Start Date: To be determined
Input Date: 11/18/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  System Engineer
Description:
Job Description: Support the F-22 Flight Test (CTF) at Edwards AFB, California. Tasks include: Support development of on-aircraft test plans and procedures to integrate and verify/validate the F/A-22 flight control system (FLCS), utilities and subsystems (hydraulics, electrical, fuel, arresting gears, auxiliary powers, brakes, life supports, etc.) software to the defined requirements; integrate the Air Vehicle Systems (AVS) on the aircraft with all other applicable aircraft systems; support on-aircraft verification of the AVS to ensure the aircraft is safe and ready for flights; support on-aircraft problem resolution for AVS; provide updates to aircraft System Test Plan and support Flight Test Operations planning; support the rest of the AVS IPT to ensure proper flow down of requirements; identify and acquire test equipment needed to support on-aircraft System Check Outs (SCO). Requires knowledge and experience of flight critical systems and software engineering, failure management of redundant flight critical systems integrated system verification, failure modes and effects testing, and testing of flight critical systems. Prior troubleshooting experience on a fighter aircraft is required. Knowledge of 1553 bus and hexadecimal (HEX) system required. Ability to work well under
pressure. Ability to work with a team. An understanding of system design. Ability to troubleshoot and debug failures. Employee must report to work with a secuity clearance and able to qualify for F-22 Special Access Clearance.
Skills/Experience: Knowledge of flight operations, Aircraft troubleshooting exp, Able to read Wiring diagrams, Read diagnostic fault code, Proficient computer skills, Good communication. Flight test experience, Exp flight test monitoring, F-22 Integrated Vehicle, System architecture knowledge, VMS/FLCS knowledge

Must have Secret Clearance
 
Job Number: LMAERO-0859
Job Location: Palmdale, CA
Rate: $38-$42
Per Diem: Possible
Overtime: Possible
Duration: 6mos-1year
Start Date: ASAP
Input Date: 10/07/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Jig & Fixt Bldr Sr.
Description:
Overview: In support of 747-8i build-up requirements, lays out, fabricates, and assembles a variety of standard and nonstandard major jigs, fixtures, tool masters, master tooling gauges and related tooling involving compound angles and complex contours where the establishment and coordination to exacting tolerances of numerous tooling holes and reference points between several planes are required. Plans work to be performed and determines methods and sequence of operations working from tool design drawings or own designs. Sets up and operates optical instruments to check overall and detailed alignment, fit, or adjustment of assemblies. Develops and designs holding devices and jig and fixture details. Prepares operational sequences and shop drawings covering parts fabrication and assembly to be performed by others. May monitor and verify quality in accordance with statistical process or other control procedures.
Responsibilities: Plans sequence of operations. Makes complete layout, fabricates and builds all types of jigs and fixtures (including tool masters) involving compound angles and complex contours where the establishment and coordination to exacting tolerances of numerous tooling holes and reference points between several planes is required. Set up on surface table or tooling docks jigs and fixtures involving complex contours, compound angles and requiring the coordination of drill holes and location of critical points with reference to stations, butt and/or water lines. Suggests changes in design involving practicability, economy and process of manufacture to proper personnel. Makes determinations regarding fabrication and design of detail parts such as fittings, stops, locating pins and mechanical operation of jigs and submits them for approval to proper personnel. Performs rework of the same level of difficulty as the work described herein. Uses complex tool design drawings and complex engineering blueprints. Uses trigonometry to solve right triangles. Operates various types machine shop equipment to complete assignment as required. Reports to the supervisor of Tool Fab.

Qualifications: The candidate is required to have a High School Diploma or accredited GED Equivalent and at least 5 years prior tool Jig Building experience. Previous Laser Tracker experience preferred.
 
Job Number: 7743
Job Location: Hawthorne, CA
Rate: $35.00 p/h
Per Diem: N/A
Overtime: Possible
Duration: At least 3-6 mos
Start Date: To be determined
Input Date: 11/10/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Engineering-Facilities 3
Description:
Overview: Oversees the planning, design, reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities; gathers and reviews data concerning facility or equipment specifications, company or government restrictions, required completion date, and construction feasibility; coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings; prepares bid sheets and contracts for construction and facilities acquisition; reviews and estimates design costs including equipment, installation, labor, materials, preparation, and other related costs; inspects or directs the inspection of construction and installation progress to ensure conformance to established drawings, specifications, and schedules.
Responsibilities: Prepare, coordinate, analyze, and implement facilities, mechanical engineering projects such as HVAC, compress air, steam, natural gas, domestic water, sewage, industrial waste and fire protection systems. Applicant shall have CAD experience, preferable Microstation, for design drawings and experience with writing project specifications is preferred. Prepare estimates, technical presentations and project status reports of work in process. Assist Plant Maintenance organizations. Requires Bachelor of Science Degree in Mechanical Engineering and typically 6 years of related Facilities Engineering experience. Professional Engineering Registration in the State of Texas, as Mechanical
Engineer is required.
Qualifications: The successful candidate will typically have a bachelor’s degree or equivalent and six years of related experience.
 
Job Number: 7850
Job Location: Dallas, TX
Rate: To be discussed
Per Diem: N/A
Overtime: Possible
Duration: Avg. is 6-12 mos
Start Date: To be determined
Input Date: 11/13/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Manufacturing Engineer
Description:
Job Description: This position is for a Flightline Manufacturing Engineer to support the F-35 Flightline. This position will directly support the supervisor and crews as they process the aircraft through fuel, run prep, engine runs, preflight and flight operations. This ME will help sequence work needed to be performed and then provide floor support for it's accomplishment. Person must be able to rotate shifts as needed and work extended hours / weekends when scheduled. Prior Fighter Flightline Experience a bonus.
Skills/Experience: Cause/Corrective Action experience, PDM, CAPPS/SFM, CATIA. Assembly tooling experience desired. Comments: This is a rotation shift requirement. MUST HAVE PRIOR JSF EXPERIENCE! NO EXCEPTIONS
 
Job Number: LMAERO-0881
Job Location: Ft.Worth, TX
Rate: $43-$48
Per Diem: Possible
Overtime: Possible
Duration: 6mos-1year
Start Date: ASAP
Input Date: 11/20/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Industrial Engineer 3
Description:
Overview: Plans plant, office, and production facilities and equipment layouts; determines the most efficient sequence of operations and work flow; and establishes methods for maximum utilization of production facilities and personnel. May establish or assist in establishing accident prevention measures and may plan and schedule training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods.

Qualifications: The successful candidate will typically have a bachelor’s degree or equivalent and six years of related experience.
 
Job Number: 7844
Job Location: North Charleston, SC
Rate: To be discussed
Per Diem: N/A
Overtime: Possible
Duration: avg. is 6-12 mos.
Start Date: To be determined
Input Date: 11/05/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Sheet Metal Mechanic
Description:
Job Description:
Sheet metal or structural mechanic experience on aircraft. Plan, layout, fabricate, assemble, install and repair various sheet metal and structural assemblies and sub assemblies utilizing precision measuring equipment. May have to work in confined spaces.

Skills/Experience:
Sheet metal Mechanic
 
Job Number: LMALC-00212
Job Location: Greenville, SC
Rate: To be discussed
Per Diem: N/A
Overtime: Possible
Duration: Avg. is 6-12 mos.
Start Date: To be determined
Input Date: 12/31/2008

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Insp Assembly
Description:
Overview: Inspect visually, physically and by instruments a variety of assemblies, sub assemblies, installations and detail parts for conformance.
Responsibilities: Inspect visually, physically and by instruments any major assembly installation on aircraft. Perform duties associated with the processing, fabrication, verification and inspection of assemblies. Check work performed by group against blueprints, OlS's and related information sources for completeness and workmanship.
Qualifications: High School Diploma or GED plus five (5) years of related experience.
 
Job Number: 7790
Job Location: North Charleston, SC
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 6mos-1year
Start Date: ASAP
Input Date: 11/13/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
Back to Advanced Job Search
Phone: (425) 806-5200
Fax: (425) 806-5585
Email: staff@cjhunter.com 		ContractJobHunter is a service of:
C.E. Publications, Inc.
P.O. Box 3006, Bothell, WA 98041-3006, USA Disclaimer
The content of this website is Copyright 2009 C.E. Publications, Inc.