Job Search Results

13 listings were found that matched your search words: Keywords: ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. )
( Listing generated 2009/11/20 Friday 08:23PM Pacific Time by ContractJobHunter. )

NOTE: If you were a subscriber, two things could have made this job search easier
1) A simple click of your mouse would have instructed us to instantly email your online resume to any (or all) of these firms.
2) We could have emailed you these Search Results, and you would not have needed to even log onto the Internet to use our service.

Click Here To Subscribe!

Listings 1 - 13
  Reliability Engineer (Electrical/Medical)
Description:
Our client is looking for a Reliability Engineer for its facility in Bothell, Wa.

Must have at least 4 years of experiencein Reliability Engineering within Electronics. Experience in Medical Device industry and FDA regulations a plus.

Duration: 5-6+ months
Rate: Open

Requirements:
Candidate Profile
• Must have 4+ years previous experience in a Reliability Engineering role
• Medical Device/FDA Regulatory experience preferred
• Ability to work in a cross-functional team environment, often under schedule pressure.
• Excellent ability to communicate both verbally and in writing.
• Proficient with Microsoft Office tools.
• BS Degree in Electrical Engineering, Reliability Engineering or equivalent
• ASQ Reliability Engineer certification (CRE) is a plus.
• Excellent ability to communicate both verbally and in writing.
• Proficient with Microsoft Office tools.


Candidate Responsibilities
The Reliability Engineer will support design qualification testing of product as a member of cross-functional product development team. The chosen applicant will participate in requirements review, data collection, analysis, issue evaluation and root cause failure analysis in the pursuit of qualification to requirements. Application of standard Reliability Engineering tools and processes will be required.
The chosen applicant will be asked to generate and monitor disciplines and processes such as:
• Design Qualification Testing and evaluation on system components
• Stress Analysis (electro mechanical)
• Verification Testing and Evaluation
• Accelerated life testing
• Failure analysis
• Root-cause analysis
• Ensures activities are in compliance with Quality System requirements
• MTBF Analysis
• ALT/HALT test design
• FMEA, FMECA analysis
• Reliability Prediction Analysis
• Application of statistical techniques (Weibull, KM)
 
Job Number: Mrel
Job Location: Bothell, Wa
Rate: Open
Overtime: Possible
Duration: 5-6 months +
Start Date: Mid November
Input Date: 10/24/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Sr. Applications Engineer (10+ years Pyrotechnics)
Description:
JOB DESCRIPTION

Summary

****With this position, you must have a minimum of ten years experience in engineering with at least 7 years in design of explosive and pyrotechnic devices.****

The Senior Applications Engineer is responsible for leading and administering technical efforts associated with the development of new business opportunities. This position works closely with the Business Develop organization and the Engineering organizations in the development of components and systems to satisfy customer needs. Significant activities included working with customers during early concept development phases of program, supporting definition of project scope and assisting in transition of new work to in-house engineering for development. Typical activities may include contacting customers, preparing technical presentations, leading/coordination cost estimating and facilitating scheduling/project management efforts.

MAJOR DUTIES

(1)Pro-actively seek new opportunities for product applications through industry contacts and networking

(2)Assist in developing and presenting technical input to customer requests for information, including program plans and associated cost estimates.

(3)Lead initial stages of new development programs to transition to the development team

(4)Communicate and meet with customer representatives, as required, to provide technical information, engineering evaluation and verbal and/or written information regarding the program status.

(5)Support design review activities

(6)Act as project manager, as needed.

(7)Maintain effective employee relations at all levels.

This job specification should not be construed to imply that these requirements are the exclusive standards of the position. Incumbents will follow any other instructions and perform any other duties as may be required by their supervisor/assistant supervisor. It is also Propulsion California’s policy to make reasonable accommodations in the essential functions of the above referenced job description for otherwise qualified disabled individuals.


QUALIFICATIONS

Specific Education, Experience, and Skill Requirements

(1)Bachelors’ Degree in an engineering field.

(2) Must have a minimum of ten years experience in engineering with at least 7 years in design of explosive and pyrotechnic devices

(3)Ability to direct and coordinate the efforts of project team members in an organized and efficient manner to achieve program goals.

(4)Possess effective communication skills (verbal as well as written), technical competence, leadership and planning skills.

(5)Experience in project management activities; cost estimating, scheduling, new supplier identification, customer problem solving.

WORKING CONDITIONS

(1)Office environment.

(2)Manufacturing and test areas.

(3)Off-site travel.

(4)Perform under unusual or extreme pressure in order to meet schedules, perform problem analysis and implement solutions, and to meet changing customer requirements.
 
Job Number: Mpyro
Job Location: So Cal, CA
Rate: $100K/year
Per Diem: No
Duration: Direct
Start Date: ASAP
Input Date: 11/17/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Methods Agent – Systems Installations
Description:
Description

• Participate within the multi-function task teams (IPDT) in establishing the assembly strategy for the new airplane.
• Participate in developing concepts and detailed methodology for structural interface joining and systems and equipment connections.
• Define the Condition of Supply for major components.
• Detail the sequence of operations for locating, drilling, fastening and connecting systems & equipment.
• Elaborate tooling strategies and new technologies to be used in order to execute the above mentioned activities (i.e.: automation, new hand tools, robotics, etc.)
• Actively participate in design reviews in order to ensure that manufacturing input is incorporate to ease the final assembly line operations.
• Define the work center structure and the assembly manuals in order to achieve proper line balancing work loads.
• Support the work center designers in order to detail the shop floor layouts within the facility.


Qualifications

• College or Bachelor's degree in Aircraft Manufacture, Mechanical Engineering or equivalent.
• Minimum of 8 years experience in assembly of aircraft or any related manufacturing field.
• Software used to produce engineering drawings is CATIA V5 and Methods deliverables will be DELMIA. Training is available as required.
• The candidate must be very analytical and have the ability to visualize and assess the overall picture in order to measure the impact for each strategic decision brought forward.
• The candidate will work very closely with the other Methods agents, Engineering, Tooling, Shop Layout and Shop Specialists in order to harmonize the team’s requirements. Teamwork, communication and entrepreneurship are essential assets.
 
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 Months
Start Date: ASAP
Input Date: 10/08/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Avionics Engineer
Description:
TAD Technical a leader in technical contract employment world wide has a great aviation job opportunity for a career oriented individual.

Assist technicians in troubleshooting aircraft avionics system problems and determine whether the source of the snag is design related or component failure. Create test definition sheets, review flight test plans and produce flight test reports to ensure that complete test requirements for TC/FAA/JAA certification are met safely. Produce engineering documentation for design changes and work around in flight test environment, to ensure aircraft flight schedules are maintained. Provide system performance analysis to ensure that the system performs its intended function and meets the design specification.

BSEE (or equivalent degree or experience) plus 7 years experience in avionics systems design and troubleshooting. A working knowledge of support aircraft ground, flight and functional testing is preferred but not mandatory. A working knowledge of EFIS, FMS, Autopilot and Rockwell Collins Pro-Line 21 systems would be advantageous. A working knowledge of aircraft electrical systems would also be advantageous. Must have strong knowledge of FAA Code of Federal Regulations Title 14 Part 25, 121 and 135. Working knowledge of RTCA documents DO-178 and DO-160. Must be willing to work all shifts.
 
Job Number: AERO8552
Job Location: Wichita, KS
Rate: 80.00 - 90.00
Per Diem: Yes
Overtime: Possible
Duration: Open
Start Date: ASAP
Input Date: 11/18/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Avionics DER
Description:
TAD Technical a leader in technical contract employment world wide has a great aviation job opportunity for a career oriented individual.

Be part of a team of engineers, supply expertise in the Avionics fields to support the design, development, flight test and certification of Business Aircraft. Integration of supplier components / systems into aircraft systems. Co-ordination with component / system suppliers on designs and design development. Prepare / review certification documentation, Certification Plans, Design Compliance Reports, etc. Prepare / review component level and aircraft level test plans and provide analysis of results.

A bachelors degree (or equivalent) in Electrical Engineering or related discipline. A minimum of 10+ years experience in avionics systems integration, design and certification. Knowledge of Part 25 FAA certification requirements (DER/AR experience required). Knowledge of Avionics systems certification requirements. A good working knowledge of systems safety, reliability, and maintainability. Must be computer literate (PC a minimum). All other computer systems and software are an advantage. Must be able to obtain a passport and travel internationally.
 
Job Number: AERO8298
Job Location: Wichita, KS
Rate: 90.00 - 110.00
Per Diem: Yes
Overtime: Possible
Duration: Open
Start Date: ASAP
Input Date: 11/18/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Methods Agent – Electrical / Harness Installations
Description:
Description

• Participate within the multi-function task teams (IPDT) in establishing the assembly strategy for the new airplane.
• Participate in developing concepts and detailed methodology for electrical interface or structural joining and systems and equipment connections.
• Detail the sequence of operations for locating systems or avionics systems/boxes and electrical harness installations and connection.
• Elaborate tooling strategies and new technologies to be used in order to execute the above mentioned activities.
• Actively participate in design reviews in order to ensure that manufacturing input is incorporate to ease the final assembly line operations.
• Define the work center structure and the assembly manuals in order to achieve proper line balancing work loads.
• Support the work center designers in order to detail the shop floor layouts within the facility.


Qualifications

• College or Bachelor's degree in Aircraft Avionics, Electrical Engineering or equivalent.
• You have between 5 (five) and 8 (eight) years experience in assembly of aircraft or any related manufacturing field.
• The candidate must be very analytical and have the ability to visualize and assess the overall picture in order to measure the impact for each strategic decision brought forward.
• The candidate will work very closely with the other Methods agents, Engineering, Tooling, Shop Layout and Shop Specialists in order to harmonize the team’s requirements. Teamwork, communication and entrepreneurship are essential assets
 
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 Months
Start Date: ASAP
Input Date: 10/08/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Avionics System Engineer
Description:
TAD Technical a leader in technical contract employment world wide has a great aviation job opportunity for a career oriented individual.

Assist technicians in troubleshooting aircraft avionics system problems and determine whether the source of the snag is design related or component failure. Create test definition sheets, review flight test plans and produce flight test reports to ensure that complete test requirements for TC/FAA/JAA certification are met safely. Produce engineering documentation for design changes and work around in flight test environment, to ensure aircraft flight schedules are maintained. Provide system performance analysis to ensure that the system performs its intended function and meets the design specification.

BSEE (or equivalent degree or experience) plus 7 years experience in avionics systems design and troubleshooting. A working knowledge of support aircraft ground, flight and functional testing is preferred but not mandatory. A working knowledge of EFIS, FMS, Autopilot and Rockwell Collins Pro-Line 21 systems would be advantageous. A working knowledge of aircraft electrical systems would also be advantageous. Must have good communication skills both written and oral and be PC literate. Must have strong knowledge of FAA Code of Federal Regulations Title 14 Part 25, 121 and 135. Working knowledge of RTCA documents DO-178 and DO-160. Must be willing to work all shifts.
 
Job Number: AERO8280
Job Location: Wichita, KS
Rate: 80.00 - 90.00
Per Diem: Yes
Overtime: Possible
Duration: Open
Start Date: ASAP
Input Date: 11/18/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Electrical DER
Description:
TAD Technical a leader in technical contract employment world wide has a great aviation job opportunity for a career oriented individual.

Engineer with DER to supply expertise in the Electrical field to support the design, development, flight test and certification of Business Aircraft. Integration of supplier components/systems into aircraft systems. Co-ordination with component / system suppliers on designs and design development. Prepare certification documentation, Certification Plans, Design Compliance Reports, etc. Prepare component level and aircraft level test plans and provide analysis of results.

A bachelors degree (or equivalent) in Electrical Engineering or related discipline. A minimum of 15+ years experience in electrical systems integration and design. DER required Part 25 requirements. Knowledge of Electrical power distribution / generation integration requirements. Previous leadership role experience preferred. Must be able to obtain a passport and travel internationally.
 
Job Number: AERO6792
Job Location: Wichita, KS
Rate: 90.00 - 110.00
Per Diem: Yes
Overtime: Possible
Duration: Open
Start Date: ASAP
Input Date: 11/18/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Sr. Technical Illustrator
Description:
Job Summary
Under minimum supervision, prepare, construct and revise Orthographic illustrations, Axonometric projections, Wiring and Schematic diagrams for technical aircraft manuals and other related graphical publications utilizing electronic methodology. Must create and manipulate graphics and using MicroStation and CADAM technical illustrating system. Must be functionally literate with 3 dimensional graphics, surfaces, wiring frames, and solids.

Principal Duties and Responsibilities:
Essential Functions:
1.Prepare, construct and revise MicroStation data (3-D, and 2-D data).
2.Prepare, construct, and revise orthographic illustrations, axonometric projections, and Wiring/Schematic diagrams on MicroStation.
3.Determine optimum graphic approach; independently prepare master artwork, charts, visual, booklets, and signs, working with all aspects of graphic arts production by utilizing electronic illustrating equipment.
4.Work with engineers, technical writers, customers, vendors, and suppliers to effectively visualize and conceptualize graphic design problems to include technical as well as non-technical graphics, color separations, overlays, and comprehensive type requirements.
5.Ensure illustrations conform to corporate, ATA 100, FAA, and commercial aircraft technical manual specifications and Client's style requirements.
6.Maintain up-to-date knowledge of artwork techniques, materials, and equipment.
7.Experience working with equipment related to and associated with electronic illustrating tools, including: High-resolution scanners, PCs and related illustration software, printers, general knowledge of electronic publishing systems, related printers and data requirements.
8.Perform other duties as assigned.

Other Requirements
1. Ability to read and interpret wiring schematics, blueprints and engineering orders.
2. Background familiarity with CADAM, Catia, and CCD. Mainframe user level operations, networks, and scanners.
3. Knowledge of import/export of data files such as: (.dxf, tiff, .cgm, and iges) and electronic publishing are desirable qualities.

Experience/Education Required
Associate degree in Art or equivalent combination of education and experience.

5 years exp in electronic technical illustrating in Aerospace or a similarly related field desirable. Ability to operate Micro-Station and Catia. See Other Requirements in Job Description.

Unique skills
Ability to operate Right Hemisphere, Adobe Creative Suite software, MicroStation and Catia v5.
Use of 3D animation and web applications preferred
Working knowledge of motion graphics
 
Job Number: D826
Job Location: Savannah, GA
Rate: 32.00 - 34.00
Per Diem: Yes
Overtime: Possible
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/12/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Interiors DER
Description:
TAD Technical a leader in technical contract employment world wide has a great aviation job opportunity for a career oriented individual.

Support New Product Development Completions Engineering Team in the review and approval of interior engineering data (including interior arrangements) in regards to major and minor changes to Client's type design. Review and approval of flammability test plans and reports, including witnessing testing as required. Ensure Client's type design complies with foreign certification requirements and review and approve process specifications relative to interior arrangements and flammability. Create certification plans and support the creation of compliance statements in support of major projects. Provide guidance and training relative to the regulatory requirements. Provide solutions to issues arising during certification projects and provide status to Management on these key issues. Coordination of component/system suppliers on designs and design development.

A Bachelor's degree (or equivalent) in Aerospace Engineering or related discipline preferred. A minimum of 10+ years experience in aerospace engineering integration and design. Consultant DER in good standing with the FAA preferred. A thorough understanding of the Part 25 certification process (TC & STC), regulations, orders, notices and policies. Must have working knowledge of FAA code of Federal Regulations Title 14 Part 21, 91 and 135. A thorough working knowledge of foreign certification regulations (JAR 25 and JAR 26). Must be fluent in Microsoft Office applications (Word, Excel, PowerPoint). All other computer systems and software are an advantage. Excellent written and oral communication skills. Must work well within a team environment and interface effectively with all levels of team members and management. Must be able to organize and prioritize multiple projects with dynamic due dates.
 
Job Number: AERO8551
Job Location: Wichita, KS
Rate: 90.00 - 110.00
Per Diem: Yes
Overtime: Possible
Duration: Open
Start Date: ASAP
Input Date: 11/18/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Technical Specialist II - Flight Controls
Description:
Job Summary
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Client's products and services

Principal Duties and Responsibilities:
Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Experience/Education Required
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.

10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Unique skills
Fly By Wire design experience on aircraft flight control systems is required.
 
Job Number: D657
Job Location: Savannah, GA
Rate: 62.00 - 68.00
Per Diem: Yes
Overtime: Possible
Duration: 1 Year +
Start Date: ASAP
Input Date: 10/19/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Electrical Systems DER
Description:
TAD Technical a leader in technical contract employment world wide has a great aviation job opportunity for a career oriented individual.

Be part of a team of engineers, supply expertise in the Avionics fields to support the design, development, flight test and certification of Business Aircraft. Integration of supplier components / systems into aircraft systems. Co-ordination with component / system suppliers on designs and design development. Prepare / review certification documentation, Certification Plans, Design Compliance Reports, etc. Prepare / review component level and aircraft level test plans and provide analysis of results.

A bachelors degree (or equivalent) in Electrical Engineering or related discipline. A minimum of 10+ years experience in avionics systems integration, design and certification. Knowledge of Part 25 FAA certification requirements (DER/AR experience required).Knowledge of Avionics systems certification requirements.A good working knowledge of systems safety, reliability, and maintainability.Must be computer literate (PC a minimum). All other computer systems and software are an advantage.Must be able to obtain a passport and travel internationally.
 
Job Number: AERO 8283
Job Location: Wichita, KS
Rate: 90.00 - 110.00
Per Diem: Yes
Overtime: Possible
Duration: Open
Start Date: ASAP
Input Date: 11/18/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
  Aircraft Static & Dynamic Loads Engineer
Description:
Functions of Position: Individual will determine, analyze and document aircraft static and dynamic structural loads. These will be based on Aerodynamic or Flight Test Data reduction and previous experience. Individual must have technical report writing experience.


Minimum Experience: Graduate Aerospace Engineer (BS, MS, or PhD). 5 years of aircraft related Aerodynamic Loads (Static and Dynamic). 5 years experience with various computer programs (Unix, Vax, Matlab, MS Office Applications). Knowledge of FAR 25 Requirements. Experience with Aerodynamic and Flight Test Data Reduction
 
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 3 - 4 Months
Start Date: ASAP
Input Date: 10/07/2009

To view contact information for the staffing firm offering this job, you must be a registered user with a resume online or a paid subscriber.

Have a Userid already?
Login to see full contact info
Back to Advanced Job Search
Phone: (425) 806-5200
Fax: (425) 806-5585
Email: staff@cjhunter.com 		ContractJobHunter is a service of:
C.E. Publications, Inc.
P.O. Box 3006, Bothell, WA 98041-3006, USA Disclaimer
The content of this website is Copyright 2009 C.E. Publications, Inc.